kanotix.com
Graphik, Video, Sound - ivtv 0.7 läuft nicht
happy_dogshit - 19.09.2006, 12:27 Uhr
Titel: ivtv 0.7 läuft nicht
Hallo ich habe grade Kanotix 2006 RC1 installiert und sehe grad das da schon ivtv 0.7 drauf ist, aber das kann nicht gestartet werden:
Code:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.7.0 (tagged release) loading
ivtv: Linux version: 2.6.17.13-kanotix-2 SMP preempt mod_unload 586 gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 20 (level, low) -> IRQ 217
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom 1-0050: Hauppauge model 26559, rev C260, serial# 8400430
tveeprom 1-0050: tuner model is LG S001D MK3 (idx 60, type 38)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 1-0050: audio processor is CX25843 (idx 37)
tveeprom 1-0050: decoder processor is CX25843 (idx 30)
tveeprom 1-0050: has radio, has no IR remote
usb 1-1: device not accepting address 2, error -110
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 1-0044: unable to open firmware v4l-cx25840.fw
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: unable to open firmware v4l-cx2341x-enc.fw
ivtv0: did you put the firmware in the hotplug firmware directory?
ivtv0 warning: failed loading encoder firmware
ivtv0 warning: Error loading firmware -3!
ivtv0: Error -3 initializing firmware.
ivtv0: Error -12 on initialization
ivtv: probe of 0000:04:05.0 failed with error -12
ali1535_smbus 0000:00:07.1: ALI1535_smb region uninitialized - upgrade BIOS?
ali1535_smbus 0000:00:07.1: ALI1535 not detected, module not inserted.
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 66
ivtv: ==================== END INIT IVTV ====================
nikitachen - 29.09.2006, 16:37 Uhr
Titel:
Hallo happy_dogshit,
ich habe eine pvr-150 und wollte diese mit Kanotix einsetzen. Leider kann ich noch nicht sagen ob es bei mir klappt, aber wenn ich unter:
http://www.ivtvdriver.org/index.php/Firmware
richtig gelesen habe dann musst du nur noch die Firmware-Files in das entsprechende directory kopieren.
Bitte berichte noch ob's funktioniert hat.
Kano - 29.09.2006, 17:40 Uhr
Titel:
apt-get install ivtv-firmware
Alle Zeiten sind GMT + 1 Stunde
PNphpBB2 © 2003-2007