ich komme nicht weiter, selbst vdr-wicki oder auch hier im forum finde ich nicht so richtiges oder versteh noch meinen fehler nicht. beim einrichten von xawtv z.b. kann ich irgendwann nur noch den button `schritt3` lesen, rest ist aber leer.
tvtime bringt ivtv:ungültiges argument
dmesg |grep tv
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.7.1 (tagged release) loading
ivtv: Linux version: 2.6.18-kanotix-1 SMP preempt mod_unload 586 gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based)
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom 2-0050: Hauppauge model 48139, rev K2B7, serial# 9939745
tveeprom 2-0050: tuner model is Philips FM1216ME MK5 (idx 117, type 4)
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 2-0050: audio processor is MSP4418 (idx 25)
tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
tveeprom 2-0050: has radio, has IR remote
tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: Failed to load module tda9887
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
msp3400 2-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv: ==================== END INIT IVTV ====================
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
damich, was ist verkehrt?
für eure mühen, schonmal dankeschön
quattro
Kano - 30.03.2007, 19:48 Uhr Titel: RE: haupauge pvr 350
Die Karte geht mit VDR, im VDR-Menü müsstest du "Kanalsuche Analog PVR" nutzen. Das dumme hierbei ist aber, dass die Sendernamen nicht erkannt werden, also musste die /var/lib/vdr/channels.conf später manuell bearbeiten (kannst dann auch umsortieren). Der Scanvorgang selbst geht über w_pvrscan. Wie du zu EPG Daten kommst weiss ich nicht, wennst die Karte als Output für TV nehmen willst, dann musst
vdr-plugin-pvr350
zusätzlich installieren. Mein Lirc Installer sollte die Hauppauge FB automatisch erkennen. Also zuerst VDR installieren mit:
( die v4l* & mpeg dateien sind die neuesten update von heute)
haste noch n tipp?
grüsse
quattro
Kano - 01.04.2007, 14:31 Uhr Titel: RE: haupauge pvr 350
Kannst du nicht ne DVB Karte nehmen, hab keine PVR grad da zum testen. War letztes Jahr bei nem Kumpel, wo ich ne PVR 150 getestet hab, doch der hat nichtmal Internet, ist also nicht so gut zum neu testen...
quattro - 11.04.2007, 16:17 Uhr Titel: RE: haupauge pvr 350
hi Kano,
ne andere karte geht nicht, ist die einzige die ich hab.
ich hab erstma mit xp geschaut ob die überhaupt funktioniert- tut se.
jetzt schau ich mal nach module tda9887, damit erstmal diese fehlermeldung weg ist.
mit dem rest werde ich weiterversuchen.
danke bis hierhin
quattro
josef - 21.06.2007, 21:38 Uhr Titel:
Hallo quattro
ich hab eine Hauppauge PVR-150 mit Kano,s VDR sofort zum laufen gebracht, nachdem Tip von Kano:
Zitat:
im VDR-Menü müsstest du "Kanalsuche Analog PVR" nutzen.
zuvor musste ich jedoch im vdr menü:
Zitat:
VDR-kanalliste ändern
auf analog TV PVR !! (ganz unten)
und dann wie Kano schrieb "Kanalsuche Analog PVR" nutzen!