Autor |
Nachricht |
|
Titel: Nikon LS4000 firewire scanner timeout
Verfasst am: 22.08.2006, 10:20 Uhr
|
|
Anmeldung: 03. Jul 2004
Beiträge: 525
|
|
I have a Nikon Firewire LS4000 scanner. It is recognised via the firewire-scsi channel as scsi1. I can preview and even scan up to about 1200dpi. At 4000 dpi it needs to read 347kb in one read but it fails at this point. Anyone have any ideas on increasing the timeout / data packet capability of firewire / scsi? This is a common fault with USB but I haven't found anything for firewire.
This is one of last two jobs for which I still need to use Windiws. The other is running PT Gui panoramic stitching which runs tooooo sloooow under Wine.
drb |
_________________ Kernel 2.6.21-slh-up-7
_____________________
|
|
|
|
|
|
Titel: Nikon LS4000 firewire scanner timeout
Verfasst am: 22.08.2006, 12:49 Uhr
|
|
Anmeldung: 09. Jan 2006
Beiträge: 1720
|
|
not yet for the packet size with firewire or timeout. This parameters are hardwired. The olny parameters I know is the BUFFER-Size and amount of Buffers.
Next parameters tochange are the tranfering modes and speed.
USB supports mode 0, 1 and 2 all tree modes sync or bulk. Sync means all transferd packets are ack, errortollerant, Bulk means send as quick as the mode allows, but do no errorcheck. timeouts or packetloss can occure.
with firewire there is only a speedsetting. 400Mbit or 800Mbit always sync. If tehere is a timeout caused from eiter sides, ther must be an error with the firewire-chips, or cable.
Cable to long for fullspeed 800MBit or bad cable-quality. unshielded where a shielded is preffered.
Chips incompatile: on pc-side a via-firewire-chip and in the scanner a nec-chip.
Coomon for timouts USB/firewire scanner uses no own powersupply and the Port can't serve this amount of amp's used by the scanner. soloution here: use a seperate powresuply for the scanner. |
|
|
|
|
|
|
Titel:
Verfasst am: 22.08.2006, 13:44 Uhr
|
|
Anmeldung: 03. Jul 2004
Beiträge: 525
|
|
schnorrer,
Thanks for the reply. I seem to have 'fixed' the problem by sampling the scan at 2x or greater. This presumably reduces each individual packet size such that my scanner now works!
drb |
_________________ Kernel 2.6.21-slh-up-7
_____________________
|
|
|
|
|
|
Titel:
Verfasst am: 18.10.2006, 15:44 Uhr
|
|
Anmeldung: 03. Jul 2004
Beiträge: 525
|
|
Vuescan have now fixed this problem so the latest release works fine.
drb |
_________________ Kernel 2.6.21-slh-up-7
_____________________
|
|
|
|
|
|
|
|