FAQ  •  Suchen  •  Registrieren  •  Einloggen, um private Nachrichten zu lesen
Login  •   Sub-Kategorie  •   Forum Minimieren

Can't get 1400x1050 to work with new monitor
kanotix.com Foren-Übersicht » English Forum » General Support
Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
Autor Nachricht
brodders
Titel: Can't get 1400x1050 to work with new monitor  BeitragVerfasst am: 31.08.2006, 23:08 Uhr



Anmeldung: 15. Jan 2005
Beiträge: 107
Hi all,

Got a nice new LCD monitor able to do 1400x1050 - but can't get either the LiveCD to play nicely or to strongarm XF86Config-4 to work either.

LiveCD detects settings inc. the 1400x modes, and fires up at 1024. cheatcodes make no difference, it always goes to 1024 e.g. even when using vga=794 (this with Kanotix 200504).

Have got a poor-mans install with config settings saved. So I went in and edited the configs.tbz (the XF86Config-4 under /etc saved there) to have the display modes as the LiveCD finds them- PLUS get the display to use the 1400x1050 modes...

on X11 reboot there is a lot of screen flashing as if modes are attempted then the system dumps it's settings and defaults to a safety mode - in 1024x768.

So.

Either:
1) the LiveCD detected invalid settings which I've cut & pasted into the configed file, or
2) the vesa driver can't cope with 1400x1050, or
3) the unknown problem.

Traurig help!

XP of course detected everything correctly; Win98 has issues. It'll only do 1280.

Typing this in 98, will paste a copy of the mutilated XF86Config-4 in a moment.

brodders
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
zulu9
Titel: Can  BeitragVerfasst am: 31.08.2006, 23:19 Uhr



Anmeldung: 31. Jul 2004
Beiträge: 249
I guess it's 2)

_________________
http://kanotix.wordpress.com/ inoffizielles Kanotix-Blog
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
brodders
Titel:   BeitragVerfasst am: 31.08.2006, 23:20 Uhr



Anmeldung: 15. Jan 2005
Beiträge: 107
XF86Config-4 with LiveCD detection + my Screen section citing to use 1400x1050 mode - which does not work:

Code:

Section "ServerLayout"
   Identifier     "XFree86 Configured"
   Screen      0  "Screen0" 0 0
   InputDevice    "Keyboard0" "CoreKeyboard"
   InputDevice    "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
        InputDevice    "USB Mouse" "CorePointer"
# ALPS TouchPad not detected
# Synaptics TouchPad not detected
EndSection

Section "ServerFlags"
   Option "AllowMouseOpenFail"  "true"
   
EndSection

Section "Files"
   FontPath   "/usr/share/fonts/X11/misc"
   FontPath   "/usr/share/fonts/X11/cyrillic"
   FontPath   "/usr/share/fonts/X11/100dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/75dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/Type1"
   FontPath   "/usr/share/fonts/X11/100dpi"
   FontPath   "/usr/share/fonts/X11/75dpi"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load  "ddc"  # ddc probing of monitor
#   Load  "GLcore"
   Load  "dbe"
   Load  "dri"
   Load  "extmod"
   Load  "glx"
        Load  "bitmap" # bitmap-fonts
   Load  "speedo"
   Load  "type1"
   Load  "freetype"
   Load  "record"
# TouchPad not detected
EndSection

Section "InputDevice"
   Identifier  "Keyboard0"
   Driver      "kbd"
        Option      "CoreKeyboard"
   Option "XkbRules" "xorg"
   Option "XkbModel" "pc105"
   Option "XkbLayout" "uk"

EndSection

Section "InputDevice"
   Identifier  "Serial Mouse"
   Driver      "mouse"
   Option      "Protocol" "Microsoft"
   Option      "Device" "/dev/ttyS0"
   Option      "Emulate3Buttons" "true"
   Option      "Emulate3Timeout" "70"
   Option       "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
   Identifier  "PS/2 Mouse"
   Driver      "mouse"
   Option      "Protocol" "IMPS/2"
Option          "ZAxisMapping"          "4 5"
   Option      "Device" "/dev/psaux"
   Option      "Emulate3Buttons" "true"
   Option      "Emulate3Timeout" "70"
   Option       "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier      "USB Mouse"
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
   Option      "SendCoreEvents"   "true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection

Section "InputDevice"
        Identifier      "ALPS TouchPad"
        Driver          "synaptics"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto-dev"
        Option          "LeftEdge"              "120"
        Option          "RightEdge"             "830"
        Option          "TopEdge"               "120"
        Option          "BottomEdge"            "650"
        Option          "FingerLow"             "14"
        Option          "FingerHigh"            "15"
        Option          "MaxTapTime"            "180"
        Option          "MaxTapMove"            "110"
        Option          "EmulateMidButtonTime"  "75"
        Option          "VertScrollDelta"       "20"
        Option          "HorizScrollDelta"      "20"
        Option          "MinSpeed"              "0.2"
        Option          "MaxSpeed"              "0.5"
        Option          "AccelFactor"           "0.01"
        Option          "EdgeMotionMinSpeed"    "15"
        Option          "EdgeMotionMaxSpeed"    "15"
        Option          "UpDownScrolling"       "1"
        Option          "CircularScrolling"     "1"
        Option          "CircScrollDelta"       "0.1"
        Option          "CircScrollTrigger"     "2"
EndSection

Section "InputDevice"
        Identifier      "Synaptics TouchPad"
        Driver          "synaptics"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto-dev"
        Option          "LeftEdge"              "1700"
        Option          "RightEdge"             "5300"
        Option          "TopEdge"               "1700"
        Option          "BottomEdge"            "4200"
        Option          "FingerLow"             "25"
        Option          "FingerHigh"            "30"
        Option          "MaxTapTime"            "180"
        Option          "MaxTapMove"            "220"
        Option          "VertScrollDelta"       "100"
        Option          "MinSpeed"              "0.06"
        Option          "MaxSpeed"              "0.12"
        Option          "AccelFactor"           "0.0010"
        Option          "SHMConfig"             "on"
        Option          "Repeater"              "/dev/ps2mouse"
EndSection

# Auto-generated by KNOPPIX mkxf86config

Section "Monitor"
   Identifier   "Monitor0"
   Option   "DPMS"   "true"
   VendorName   "CMO"
   ModelName   "CMO0208"
   HorizSync 30 - 82 # DDC-probed
   VertRefresh 56 - 76 # DDC-probed
   # These are the DDC-probed settings reported by your monitor.
   # 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03
   ModeLine "1280x1024"   135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
   # 1152x864, 75.0Hz; hfreq=67.50, vfreq=75.00
   ModeLine "1152x864"   108.00 1152 1216 1344 1600  864  865  868  900 +hsync +vsync
   # 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
   ModeLine "1024x768"    78.75 1024 1040 1136 1312  768  769  772  800 +hsync +vsync
   # 1024x768, 70.0Hz; hfreq=56.48, vfreq=70.07
   ModeLine "1024x768"    75.00 1024 1048 1184 1328  768  771  777  806 -hsync -vsync
   # 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00
   ModeLine "800x600"    49.50  800  816  896 1056  600  601  604  625 +hsync +vsync
   # 800x600, 72.0Hz; hfreq=48.08, vfreq=72.19
   ModeLine "800x600"    50.00  800  856  976 1040  600  637  643  666 +hsync +vsync
   # 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
   ModeLine "800x600"    40.00  800  840  968 1056  600  601  605  628 +hsync +vsync
   # 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00
   ModeLine "640x480"    31.50  640  656  720  840  480  481  484  500 -hsync -vsync
   # 640x480, 72.0Hz; hfreq=37.86, vfreq=72.81
   ModeLine "640x480"    31.50  640  656  696  816  480  481  484  504 -hsync -vsync
   # 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
   ModeLine "640x480"    25.17  640  648  744  784  480  482  484  509 -hsync -vsync
   # Extended modelines with GTF timings
   # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
   ModeLine "640x480"  43.16  640 680 744 848  480 481 484 509  -HSync +Vsync
   # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
   ModeLine "768x576"  34.96  768 792 872 976  576 577 580 597  -HSync +Vsync
   # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
   ModeLine "768x576"  42.93  768 800 880 992  576 577 580 601  -HSync +Vsync
   # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
   ModeLine "768x576"  45.51  768 808 888 1008  576 577 580 602  -HSync +Vsync
   # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
   ModeLine "768x576"  51.84  768 808 888 1008  576 577 580 605  -HSync +Vsync
   # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
   ModeLine "768x576"  62.57  768 816 896 1024  576 577 580 611  -HSync +Vsync
   # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
   ModeLine "800x600"  68.18  800 848 936 1072  600 601 604 636  -HSync +Vsync
   # 1024x600 @ 60.00 Hz (GTF) hsync: 37.32 kHz; pclk: 48.96 MHz
   ModeLine "1024x600"  48.96  1024 1064 1168 1312  600 601 604 622  -HSync +Vsync
   # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
   ModeLine "1024x768"  113.31  1024 1096 1208 1392  768 769 772 814  -HSync +Vsync
   # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
   ModeLine "1152x864"  81.62  1152 1216 1336 1520  864 865 868 895  -HSync +Vsync
   # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
   ModeLine "1152x864"  119.65  1152 1224 1352 1552  864 865 868 907  -HSync +Vsync
   # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
   ModeLine "1152x864"  143.47  1152 1232 1360 1568  864 865 868 915  -HSync +Vsync
   # 1280x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 80.14 MHz
   ModeLine "1280x768"  80.14  1280 1344 1480 1680  768 769 772 795  -HSync +Vsync
   # 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz
   ModeLine "1280x800"  83.46  1280 1344 1480 1680  800 801 804 828  -HSync +Vsync
   # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
   ModeLine "1280x960"  124.54  1280 1368 1504 1728  960 961 964 1001  -HSync +Vsync
   # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
   ModeLine "1280x960"  129.86  1280 1368 1504 1728  960 961 964 1002  -HSync +Vsync
   # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
   ModeLine "1280x960"  178.99  1280 1376 1520 1760  960 961 964 1017  -HSync +Vsync
   # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
   ModeLine "1280x1024"  190.96  1280 1376 1520 1760  1024 1025 1028 1085  -HSync +Vsync
   # 1368x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 85.86 MHz
   ModeLine "1368x768"  85.86  1368 1440 1584 1800  768 769 772 795  -HSync +Vsync
   # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
   ModeLine "1400x1050"  122.61  1400 1488 1640 1880  1050 1051 1054 1087  -HSync +Vsync
   # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
   ModeLine "1400x1050"  149.34  1400 1496 1648 1896  1050 1051 1054 1094  -HSync +Vsync
   # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
   ModeLine "1400x1050"  155.85  1400 1496 1648 1896  1050 1051 1054 1096  -HSync +Vsync
   # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
   ModeLine "1400x1050"  179.26  1400 1504 1656 1912  1050 1051 1054 1103  -HSync +Vsync
   # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
   ModeLine "1400x1050"  214.39  1400 1512 1664 1928  1050 1051 1054 1112  -HSync +Vsync
   # 1440x900 @ 60.00 Hz (GTF) hsync: 55.92 kHz; pclk: 106.47 MHz
   ModeLine "1440x900"  106.47  1440 1520 1672 1904  900 901 904 932  -HSync +Vsync
   # 1440x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 126.27 MHz
   ModeLine "1440x1050"  126.27  1440 1536 1688 1936  1050 1051 1054 1087  -HSync +Vsync
   # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
   ModeLine "1600x1200"  280.64  1600 1728 1904 2208  1200 1201 1204 1271  -HSync +Vsync
   # 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz
   ModeLine "1680x1050"  147.14  1680 1784 1968 2256  1050 1051 1054 1087  -HSync +Vsync
   # 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52 kHz; pclk: 193.16 MHz
   ModeLine "1920x1200"  193.16  1920 2048 2256 2592  1200 1201 1204 1242  -HSync +Vsync
EndSection

Section "Device"
   Option      "RenderAccel"   "1"
   ### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
Option "sw_cursor"
        #Option     "hw_cursor"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "ShadowFB"
        #Option     "UseFBDev"
        #Option     "Rotate"
   Identifier  "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
   Driver      "nv"
   VendorName  "All"
   BoardName   "All"
#   BusID       "PCI:1:0:0"
EndSection

Section "Screen"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "Monitor0"
   DefaultColorDepth 16
   SubSection "Display"
      Depth     1
      Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600"
   EndSubSection
   SubSection "Display"
      Depth     4
      Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600"
   EndSubSection
   SubSection "Display"
      Depth     8
      Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600"
   EndSubSection
   SubSection "Display"
      Depth     15
      Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600"
   EndSubSection
   SubSection "Display"
      Depth     16
      Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600"
   EndSubSection
   SubSection "Display"
      Depth     24
      Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600"
   EndSubSection
   SubSection "Display"
      Depth     32
      Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600"
   EndSubSection
EndSection

Section "DRI"
   Mode 0666
EndSection

Section "Extensions"
#   Option   "Composite"   "1"
#   Option   "RENDER"   "1"
EndSection
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
piper
Titel:   BeitragVerfasst am: 31.08.2006, 23:24 Uhr
Team Member
Team Member


Anmeldung: 03. Mai 2005
Beiträge: 1544
Wohnort: out there somewhere
Try easter rc 4

http://debian.tu-bs.de/project/kanotix/ ... er-RC4.iso

_________________
h2's d-u script
h2's rdiff-backup script
 
 Benutzer-Profile anzeigen Private Nachricht senden Website dieses Benutzers besuchen  
Antworten mit Zitat Nach oben
ockham23
Titel:   BeitragVerfasst am: 31.08.2006, 23:27 Uhr



Anmeldung: 25. Mar 2005
Beiträge: 2133
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "nv"

This isn't vesa.

Did you try the change res utility from the Kanotix menu? What about increasing DefaultColorDepth to 24 (restart X by pressing Ctrl+Alt+Backspace)?

_________________
And I ain't got no worries 'cause I ain't in no hurry at all (Doobie Brothers, "Black Water").
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
brodders
Titel:   BeitragVerfasst am: 31.08.2006, 23:39 Uhr



Anmeldung: 15. Jan 2005
Beiträge: 107
!! The power of the Forum !! Why did I just spend 3 hours fiddling when I could have asked?

Using VDR R6 and - with the edited Config file posted - It's in 1400x1050 and everything is small now. .

Yep it is nv ... vesa is the emergency mode. Well spotted! My confusion in flipping about so.


Thanks one and all Smilie Smilie Smilie
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Beiträge vom vorherigen Thema anzeigen:     
Gehe zu:  
Alle Zeiten sind GMT + 1 Stunde
Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
 kanotix.com Foren-Übersicht » English Forum »  General Support
PNphpBB2 © 2003-2007