1. 1. 1. refid st t when poll reach delay offset jitter

---

älteste bekannte Version dieser Seite wurde bearbeitet am 2006-09-20 18:55:48 von cokeinthebottle [ ]

One of my boxes kept losing 15 seconds a day .. and ntpdate on a cronjob didnt fix it, so .. first apt-cache search ntp
unfreeze
install ntpdate,ntp,and, quite important,
ntp-doc - Network Time Protocol documentation
Find that on yer system at
/usr/share/doc/ntp-doc/html/index.html <- and bookmark it!
its a large doc,and not all of it applies, but its got it all,pretty much.
freeze, so they start at boot
ntp and ntpdate are run as services ..
ntpdate is only run at-boot, when it will get time from the list of servers in /etc/ntp.conf, which is the main file to edit,
both ntpdate and the ntpd daemon [called ntp] poll the list of timeservers near the top of
/etc/ntp.conf.. heres my current list as example:

Code:

# pool.ntp.org maps to more than 100 low-stratum NTP servers.
# Your server will pick a different set every time it starts up.
# * Please consider joining the pool! *
# * <>∞> *
server 192.168.3.24
server ntp.blueyonder.co.uk
server uk.pool.ntp.org
server 1.uk.pool.ntp.org
server 2.uk.pool.ntp.org
server 0.europe.pool.ntp.org
server 1.europe.pool.ntp.org
server 2.europe.pool.ntp.org


the first one is the other box on my network, also running ntp
the second is the timeserver of my isp
next are some of the uk.pool,then a few europeans for good luck
btw, your own isp-nameservers are often also timeservers
you can check this by running

Code:

ntpdate -v <ip>

which wont change anything, but will return a time-result,something like:
Code:

# ntpdate -v 192.168.3.24
19 Sep 19:09:27 ntpdate[13329]: ntpdate 4.2.2@1.1532-o Wed Aug 9 12:08:54 UTC 2006 (1)

then you want to allow access to yer local boxes
Code:

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1 nomodify
restrict 192.168.24

now you want to broadcast
Code:

# If you want to provide time to your local subnet, change the next line.
# (Again, the address is an example only.)
broadcast 192.168.3.255

the ntp.conf file itself is a bit odd, its treated as a diff if you just click on it
ok .. before you start ntp, you must set the time, ie
Code:

# ntpdate -u -b uk.pool.ntp.org
19 Sep 19:19:33 ntpdate[15641]: step time server 62.3.200.116 offset 0.001523 sec

then start ntp, as a service,to start at every boot
after ntp has run for a few, do:
Code:

ntpq -pn

if alls gone well, you should see something like:
Code:

# ntpq -pn

1. 1. 1. refid st t when poll reach delay offset jitter